C6090I HP Hp Matchprint Inkjet Proofing Sys 5042 Replacement Parts
Manufacturer
Model Number
C6090I
Description
Hp Matchprint Inkjet Proofing Sys 5042
Parts List
| Category | Part Number | Description | Demand | Availability |
|---|---|---|---|---|
| Q1251-60263 | HP 128Mb Sdram Dimm Memory Module | No | ||
| Spindle | C6090-60074 | HP 42-Inch Rollfeed Spindle Rod Assembly - Includes Spindle, Hubs, And End Caps | No | |
| Spindle | C6090-60310 | HP 42-Inch Take-up Reel Spindle | No | |
| C6090-60187 | HP 64Mb Sdram Dimm Memory Module | No | ||
| Q1251-60258 | HP Air Pressurization System (Aps) | No | ||
| Cover,Cap | C6090-60037 | HP Back Cover - The Large Plastic Cover With Hinges For The Top Cover - 42 Inches | No | |
| Q1251-60267 | HP Belt Tensioner Kit - Keeps Carriage Belt Tight - Includes Pulley Assembly, Pulle | No | ||
| Q1251-60259 | HP Booster Fan Assembly | No | ||
| C6090-60056 | HP Bottom Cross-brace - Brace That Connects And Supports The Two Stand Legs - 42 In | No | ||
| C6090-60107 | HP Bracket Kit For The Electronics Module | No | ||
| Cables, PCB Cable | C6090-60109 | HP Cable Protector (Retainer) Kit - Package Of Seven Plastic Cable Edge Protectors | No | |
| Pump, Motor | Q1251-60268 | HP Carriage (Scan-axis) Motor Assembly - Includes Pulley And Power Cable | No | |
| Belt, Pulley | Q1251-60320 | HP Carriage Belt - Long Belt Attached To The Carriage (For The 42-Inch Wide Version | No | |
| Guide | Q1251-60321 | HP Center Paper Guide - For The 42-Inch Wide Version Plotter | No | |
| Plate | Q1251-60305 | HP Center Platen Assembly | No | |
| Panel | Q1251-60262 | HP Control Panel Assembly - Includes Control Panel Cable | No | |
| C6090-00221 | HP Control Panel Overlay (English) | No | ||
| Q1251-60279 | HP Cooling Fan - Installed Under Power Supply (Two Used) | No | ||
| Cutter | Q1251-60317 | HP Cutter Assembly Kit - Includes Cutter, Screw And Washer | No | |
| Gear, Wheel | C6090-60096 | HP Drive Roller Gear (Overdrive Gear) | No | |
| Q1251-60280 | HP Electronics Module Chassis - Includes The Electronics Module Metal Chassis Base, | No | ||
| Cover,Cap | Q1251-60277 | HP Electronics Module Cover Kit - Includes Main Cover, Eio Cover And Hard Disk Cove | No | |
| C6090-60077 | HP Entry Roller - The Long Roller Located Under The Main Printer Chassis - 42 Inche | No | ||
| Cover,Cap | C6095-60140 | HP Extension Cover - Installed On The Rear Of The Unit Next To The Left End Cover | No | |
| Leg, Foot, Caster | C6090-60049 | HP Foot Assembly (Includes Casters) - Mounts To The Bottom Of The Printer Stand Leg | No | |
| Guide | C6090-60271 | HP Front Tube Guide Assembly (For The 42-Inch Wide Version Plotter) - Includes Tub | No | |
| Kit | C6090-60046 | HP Hardware Kit For Printer Stand - Includes Screwdriver And Screws | No | |
| Label | C6090-00244 | HP Im Hp Tag Line Label | No | |
| Q1251-60316 | HP Ink Supply Station (Iss) - Includes Grounding Strip | No | ||
| Q1251-60252 | HP Ink Supply Station (Iss) Pc Board - Includes Cable | No | ||
| Pipe, Tube, Hose, Fitting | Q1251-60254 | HP Ink Tubes Assembly - Includes 6 Ink Tubes Complete With Hardware Assemblies At B | No | |
| Cover,Cap | C6090-60039 | HP Left End Cover And Rear Door | No | |
| Q1251-60086 | HP Left Rear Electronics Module Cover | No | ||
| Holder | C6090-60348 | HP Left Take-up Reel Holder | No | |
| Trim | C6090-60042 | HP Left Trim - Between The Main Chassis And The Left End Cover | No | |
| Leg, Foot, Caster | C6090-60047 | HP Leg Assembly - Does Not Include The Foot Assembly | No | |
| Lever | C6090-60102 | HP Lever - Used To Actuate The Pinch Arm Lift Mechanism | No | |
| Lever | C6090-60097 | HP Lever Support Bracket | No | |
| Q1251-69269 | HP Main Logic Pc Board | No | ||
| Kit | C6090-60314 | HP Maintenance Kit - Includes Lens Maintenance Kit, Carriage Interconnect Wiper Kit | No | |
| Kit | C6090-60081 | HP Maintenance Kit - Includes Screws, Label, Ferrite, Trailing Clip, Detect Assembl | No | |
| Foam | C6090-60263 | HP Media Guide Foam Kit - Small Black Foam Pieces That Fit In Designated Spaces Loc | No | |
| Sensor, Thermistor, Thermostat | Q1251-60261 | HP Media Sensor | No | |
| Pump, Motor | Q1251-60264 | HP Paper-axis Motor - Includes Helical Gear And Grease - Motor That Provides Power | No | |
| C6090-60073 | HP Pinch Assembly Kit - Includes All Required Pinch Wheels, Pinchwheel Mounts And S | No | ||
| Q1251-60256 | HP Pincharm Lift (Cam Lever Shaft) Mechanism - Includes Cam (A Long Bar), Cam Lever | No | ||
| Q1251-69312 | HP Power Supply Unit - For Designjet Printers | No | ||
| C7769-69376 | HP Printhead Carriage Assembly - Includes Carriage, Bushings, Pen Latches, Carriage | No | ||
| Holder | C6095-40065 | HP Quick Reference Guide Holder - Installed On The Back Of The Right End Cover | No | |
| Door,Remote Control Door | C6090-60040 | HP Rear Door - Installed On Left End Cover | No | |
| Pipe, Tube, Hose, Fitting | C6090-60078 | HP Rear Tube Guide Assembly - Includes Safety Arm For Top Cover - 42 Inches | No | |
| Cover,Cap | Q1251-60251 | HP Right End Cover - Includes Control Panel Cable And Aerosol Fan | No | |
| Q1251-60085 | HP Right Rear Electronics Module Cover | No | ||
| Holder | C6090-60347 | HP Right Take-up Reel Holder | No | |
| Trim | Q1251-60253 | HP Right Trim - Between The Main Chassis And The Right End Cover - Includes Window | No | |
| Hard Drive, Optical Drive | C6090-60300 | HP See C6090-69300 | No | |
| Q1251-60257 | HP Service Station Assembly - Includes Motors, Spittoon Foam, Drop Detector, And Pr | No | ||
| C6090-60106 | HP Setup Printhead Kit - Used To Prime The Ink Tubes - Includes 6 Setup Printheads | No | ||
| Guide | Q1253-60044 | HP Shield Kit (Emc Covers) - Set Of 3 Electromagnetic Shields Installed Behind And | No | |
| C6090-60105 | HP Spindle Hub (Blue) - Installed On The Left End Of The Rollfeed Spindle | No | ||
| Pipe, Tube, Hose, Fitting | C6090-60177 | HP Take-up Reel Core - 42 Inches | No | |
| Deflector & Chute | C6090-60179 | HP Take-up Reel Paper Deflector Assembly - A Long Tube Attached To The Printer With | No | |
| Guide | C6090-60309 | HP Take-up Reel Paper Guide - Has A Lever Used To Lock The Guide On The Spindle | No | |
| Sensor, Thermistor, Thermostat | C6090-60349 | HP Take-up Reel Sensor | No | |
| Cover,Cap | C6090-60291 | HP Top Cover Assembly - Covers The Top Of The Printer | No | |
| C6090-60055 | HP Top Cross-brace - Brace That Connects And Supports The Two Stand Legs - 42 Inche | No | ||
| Door,Remote Control Door | C6090-60272 | HP Tube Guide Door And Spring | No | |
| Q1251-60260 | HP Vacuum Fan Assembly - Includes The Fan And Air Flow Guide Assembly | No |